🛢️⚡ 12V 80W Electric Oil Extractor Pump – Engine Oil & Gear Oil Transfer Kit with Hoses
🛢️⚡ 12V 80W Electric Oil Extractor Pump – Engine Oil & Gear Oil Transfer Kit with Hoses
Couldn't load pickup availability
🛢️⚡ 12V 80W Electric Oil Extractor Pump – Engine Oil & Gear Oil Transfer Kit with Hoses
CHANGE YOUR OIL.
SKIP THE CRAWLING.
A compact electric oil extractor designed to make routine fluid changes faster, cleaner and easier.
Skip the Jack.
Skip Crawling Underneath.
Insert the suction hose through the appropriate access point, route the discharge hose into your waste-oil container, connect the pump to a compatible 12V power source and start extracting.
| ✓ SUITABLE | ✕ DO NOT USE |
| Engine Oil | Gasoline / Petrol |
| Lubricating Oil | Water |
| Compatible Gear / Differential Oil* | Highly Flammable Liquids |
MOTOR PROTECTION
🛡️ BUILT-IN OVERCURRENT PROTECTION
Cold, thick oil puts more strain on a pump. The built-in protection system is designed to reduce power under excessive load, helping protect the motor during demanding extraction conditions.
PRO TIP: Warm engine oil generally flows more easily than cold, highly viscous oil. Follow your vehicle's service guidance and avoid handling dangerously hot oil.
CONTROL AT YOUR FINGERTIPS
ONE-TOUCH BUILT-IN POWER SWITCH
Start and stop the pump directly from the unit—no need to repeatedly disconnect the battery clamps just to control operation.
LESS LEAKING.
LESS CLEANUP.
Secure hose connections help keep the fluid moving where it belongs: through the pump and into your collection container.
Secure the supplied hoses with the included clamps to help prevent accidental loosening and leaks.
Connect the suction and discharge sides correctly before switching the pump on.
POWERFUL ENOUGH FOR THE GARAGE.
COMPACT ENOUGH FOR THE TOOLBOX.
VOLTAGE POWER
12V DC 80W
CURRENT FLOW RATE
6.7A 0.13 GPM
✓ 12V Electric Oil Extractor Pump
✓ 6mm × 1200mm Inlet Hose
✓ 12mm × 1500mm Outlet Hose
✓ Hose Clamps × 2
5 STEPS. THAT'S IT.
A straightforward setup designed for home garages and routine maintenance.
⚠️ IMPORTANT: Confirm correct hose direction and secure all connections before operation. Never run the pump dry.
ONE PUMP.
MORE WAYS TO USE IT.
A practical addition to the garage for compatible engines and equipment that allow fluid extraction through an accessible service point.
WHY CRAWL UNDER THE VEHICLE
IF YOU DON'T HAVE TO?
For compatible vehicles, the 12V Oil Extractor Pump gives DIY owners a simpler way to remove old oil from above—helping reduce the hassle and mess of routine maintenance.
CONNECT → SWITCH ON → EXTRACT
Do not use with gasoline/petrol, water, or highly flammable liquids. Confirm fluid compatibility before use. Secure all hose connections with clamps and follow the vehicle or equipment manufacturer's service instructions. Allow the pump to cool as required and do not exceed the recommended duty cycle.
